Need help?Do you have a question about the Microgate Polifemo and is the answer not in the manual?
Sets transmission channel and signal type using DIP switches for device compatibility.
Details the centering procedure using audio feedback (BEEP) for accurate alignment with the reflector.
Describes digital data transmission, including transmitter code, signal type, redundancy, and error correction.
Explains how to set the transmission channel using switches for compatibility with receiving devices.
Details how to set the type of impulse (Start, Lap, Stop) using switches 1-3.
Explains setting long/short transmission duration (switch 8) and its impact on data redundancy.
Guides on connecting the photocell to a chronometer, including connectors and antenna setup.
Describes how to disable wireless transmission by setting specific channel selection switches.
Details the output signal duration, delay, and level changes upon beam interruption.
Details the steps and management of battery recharging, including normal and immediate procedures.
Explains how to perform an immediate recharge, with a caution about battery life.
Describes how to identify and what causes anomalies during the battery recharge process.
To Next Page
General