microHAM © 2016 All rights reserved
CW MESSAGES TAB
CW Keyer supports nine messages of up to 50 characters each which can be stored are stored in non-
volatile memory. Each memory may have a programmable repeat delay and/or call another memory.
Commands which may be included in a memory are:
Merge: merge two characters without a letter space – [M]AS will sound AS .-...
Cancel WPM: restore speed set by the Speed pot.
Set WPM: force WPM to selected speed regardless of position of speed knob.
Set Key: close CW output for selected time in seconds.
Set Wait: pause "n" seconds during playback.
Jump to: jump to the selected message
Delay: delay in seconds before executing the jump
Test: will play a message without storing it
Store: saves one message to non-volatile memory
Store All: saves all messages to non-volatile memory
Load from File: loads all messages from file
Save to File: saves all messages to file
Messages can also be saved and replayed using an external PS/2 keyboard or paddles and PS/2 keypad.
NOTE: Messages are not saved or loaded with Presets.
22
To Next Page
Loading...
