You can control the system using the supplied remote. Insert 2 AAA (R03) batteries by matching the +
and - ends on the batteries to the markings inside the compartment. When using the remote, point it
at the remote sensor on the control unit.
*Do not leave the remote in an extremely hot or humid place.
*Do not use a new battery with an old one.
*Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
*Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a
malfunction.
*If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
Inserting batteries into the remote
Notes
2
To Next Page
Loading...