Microlab SOLO 1C - User Manual

Before using, please read the manual carefully
All other brand and product names are trademarks of their respective holders. Actual contents may differ slightly from those shown in print. All
specifications and designs are subjected to changes without any prior notice.
No.:80-SOLO1C/2C-97-0001-01
Multimedia Speaker System
User's Manual
Microlab Technology Company Ltd.
Made in China
SOLO
1C/2C
80- -97-0001-01 2008 11 19chuSOLO1C/2C

Summary

Important Safety Instructions

Explanation of Graphical Symbols

Explains the meaning of graphical symbols used in the manual for safety.

Technical Information

Unpacking the system

Unpacking Steps

Provides a step-by-step guide for safely unpacking the product from its packaging.

Function Instruction

Front View Overview

Details the components and controls visible on the front panel of the speaker system.

Remote Control Functions

Explains the operation and functions of each button on the remote control unit.

Back View Overview

Describes the rear panel layout, including input/output ports and power switch.

System Connection

Connection Procedure

Step-by-step instructions for connecting the speakers, audio source, and power.

Microlab SOLO 1C Specifications

General

Type	2.0 Speaker System
Configuration	2.0
Frequency Response	50Hz - 20kHz
Impedance	4Ω
Signal-to-Noise Ratio	85dB
Input Sensitivity	500mV
Dimensions (W x H x D)	170 x 210 x 200 mm
Material	MDF
Power source	AC 220V
Power Supply	AC 220V
Input Impedance	10kΩ