Support MPPT mode
1. Place the solar panel in direct sunlight. (Note: Do not expose the
power station and other charging-related equipment to direct
sunlight or a damp environment)
2. Connect the output cable (3.5mm) of the solar charging panel to
the charging input port of the machine, and the charging will start
automatically.
3. During the charging process, the electric quantity indicator symbol
circulates from the current amount of electricity to the full amount of
electricity, displaying the percentage of battery power. "Input Power"
and the current input power value, "Time To Full" and the remaining
charging time are also displayed.
4. After the device is fully charged, unplug the power cord of the
solar panel from the unit.
Charging - Photovoltaic Solar Panels
To Next Page
Loading...