10
7. CARE AND MAINTENANCE, RECALIBRATION
a) Do not expose the device to either extreme
temperatures, humidity, dust or direct sunlight.
b) The cuff contains a sensitive air-tight bubble. Handle
the cuff carefully and avoid all types of straining
through twisting or buckling.
c) Handle the tube carefully. Avoid stress from pulling,
pinching and sharp edges.
d) Clean the device with a soft, dry cloth. Do not use
gasoline, thinners or similar solvents. Carefully
remove spots on the cuff with a damp cloth and
soapsuds. The cuff should not be washed in a
clothes or dishwasher!
e) Do not drop the instrument or treat it roughly in any
way. Avoid strong vibrations.
f) Never open the device! This can negatively impact
the calibration! (accuracy)
Periodical re-calibration
Sensitive measuring devices must be checked for accuracy from time to time. We recommend a periodical
inspection of your unit by an authorized microlife dealer every 2 years.
Your factory authorized microlife dealer would be pleased to provide more information regarding calibration.
8. GUARANTEE
This instrument is covered by a 3 year guarantee from the date of purchase. The guarantee is valid only
on presentation of the guarantee card completed by the dealer confirming date of purchase or the receipt.
Batteries, cuff and wearing parts are not included. Opening or altering the instrument invalidates the
guarantee. The guarantee does not cover damage caused by improper handling, discharged batteries,
accidents or non-compliance with the operating instructions.
Name and company address of the responsible dealer:
To Next Page
Loading...
Need help?
General
