12
4. How do I get started?
4.1. Inserting the batteries
After you have unpacked your device, insert
the batteries. The battery compartment is
located on the bottom of the device.
a) Remove the battery cover.
b) Insert the batteries (4 x size AA 1.5 V),
observing the indicated polarity.
c) If a battery warning appears in the
display, the batteries are discharged and
must be replaced.
Attention!
• After the low battery indicator appears,
the device won’t function until the batteries
have been replaced.
•
Please use "AA" Long-Life or Alkaline
1.5 V
batteries and replace them all at
the same time..
• If the blood pressure monitor is not used
for long periods, remove the batteries
from the device.
• We do not recommend using recharge-
able batteries with this device.
Low Battery Indicator
To Next Page
Loading...
