13
4.2. Setting the date and time
1. After the new batteries are activated, the
year number flashes in the display. You
can advance the year by pressing the "M"
button. To confirm and then set the
month, press the TIME button.
2. You can now set the month using the "M"
button. To confirm and then set the day,
press the TIME button.
3. Please follow the instructions above to
set the day, hour and minutes.
4. Once you have set the last minute and
pressed the TIME button, the date and
time are set and the time is displayed.
5. If you want to change the date and time,
press and hold the TIME button down for
approximately 3 seconds until the year
number starts to flash. Now you can
enter the new values as described above.
M
em
or
y
But
t
on
T
i
m
e/
D
at
e
But
t
on
To Next Page
Loading...
