Microlife NEB400 - Technical Specifications

5NEB 400
EN
8. Technical Specifications
This device complies with the requirements of the Medical Device
Directive 93/42/EEC.
Class II device as regards protection against electric shocks.
Nebuliser, mouthpiece and masks are type BF applied parts.

The technical specifications may change without prior
notice.
Nebulisation rate: 0.4 ml/min. (NaCI 0.9%)
Particle size: 63% < 5 µm
2.83 µm (MMAD)
Max. free air flow: 15 l/min.
Operating air flow: 5.31 l/min.
Acoustic noise level: 52 dBA
Power source: 230V 50 Hz AC
Power lead length: 1.6 m
Nebuliser capacity: min. 2 ml; max. 8 ml
Residual volume: 0.8 ml
Operating limits: 30 min. On / 30 min. Off
Operating conditions: 10 - 40 °C / 50 - 104 °F
30 - 85 % relative maximum humidity
700 - 1060 hPa Atmospheric pressure
Storage and shipping
conditions:
-20 - +60 °C / -4 - +140 °F
10 - 95 % relative maximum humidity
700 - 1060 hPa Atmospheric pressure
Weight: 1424 g
Dimensions: 200 x 183 x 153 mm
IP Class: IP21
Reference to
standards:
EN 13544-1; EN 60601-1; EN 60601-2;
EN 60601-1-6; IEC 60601-1-11
Expected service life: 1000 hours