Need help?Do you have a question about the Microlife 200 Series and is the answer not in the manual?
General| Measurement Method | Oscillometric |
|---|---|
| Device Type | Blood Pressure Monitor |
| Accuracy | +/- 3 mmHg (blood pressure), +/- 5 % of reading (pulse) |
| Power Source | 4 x AA batteries |
| Operating Temperature | 10°C to 40°C |
| Operating Humidity | 15% to 85% RH |
| Storage Temperature | -20°C to 60°C |
Introduction to the Microlife pulse oximeter and its user-friendly design.
Explains the technology behind fingertip pulse oximeters using light absorption.
Diagram identifying key components and display elements of the pulse oximeter.
Instructions for correctly inserting AAA batteries into the device.
Guidance on how to attach and use the device's safety lanyard.
Defines oxygen saturation (SpO2) and factors that can reduce it.
Step-by-step guide on how to measure blood oxygen and pulse rate using the device.
Details warning alerts for low pulse rate or low oxygen saturation levels.
Troubleshooting for when SpO2 or pulse rate readings are not displayed correctly.
Solutions for unstable SpO2 or pulse rate measurements.
Troubleshooting steps if the pulse oximeter fails to power on.
Explanation for the device's automatic shut-off feature.
To Next Page
