Microlife OXY 300 - Page 3

1 ENMicrolife OXY 300
Explanation of symbols:
Microlife OXY 300
EN
1 ON/OFF button
2 Oxygen saturation (value as percentage)
3 Pulse rate (value in beats per minute)
4 Pulse wave (plethysmographic wave)
5 Pulse bar
6 Low battery indicator
7 Inserting the batteries
8 Attaching the lanyard
AT Display modes
AT Operation principle
Batteries and electronic
devices must be disposed of in
accordance with the locally
applicable regulations, not with
domestic waste.
Read the important information
in these instructions for use
before using this device. Follow
the instructions for use for your
safety and keep it for future
reference.
Type BF applied part
Keep dry
Manufacturer
Date of manufacture
No SpO
2
alarm
Low battery indicator
Serial number
Protected against dripping
water
Authorized representative
in the European Community
Oxygen saturation (value as
percentage)
Pulse rate (value in beats per
minute)
Operating
conditions:
Storage conditions:
-20 - +55°C / -4 - +131 °F
CE Marking of Conformity
S N
N
2
% SpO
PR bpm
0123