Microlife WatchBP Home - Proper Blood Pressure Measurement Steps; Measurement Preparation (Steps 1-2)

16
Step 5
Sit upright and lean comfortably against the chair’s
backrest. Press the start button. The device will
initiate a 60-second countdown in «DIAG.» mode or a
15-second countdown in «USUAL» mode. During the
measurement do not move, cross your legs, or tense
your arm muscles. Breath normally and do not talk.
Step 6 (in «DIAG.» mode)
One measurement cycle includes two measurements.
Once the rst measurement is complete, continue to
relax as you wait for the second measurement. The
second measurement will start after 60-seconds. During
this time avoid any movement.
SYS
mmHg
mmHg
/min
USUAL
DIAG.
NOCTURNAL
DIA
PUL
Eight steps for measure blood pressure properly (cont.)
1 2
60 sec.