EN
17
Step 7 (in «DIAG.» mode)
Once the two readings are complete, measurement
data is automatically stored for future reference by your
doctor. If an error displays after the readings, please
repeat the rst six steps once again.
Step 8 (in «DIAG.» mode)
When seven days of measurements have been collected,
the Doctor Symbol will ash on the display. Do not forget
to take your WatchBP Home A device with you on your
next visit to the doctor. (Note: the doctor symbol is only
displayed for measurements in «DIAG.» Mode.)
Automatically stored
To Next Page
Loading...
