Microlife WatchBP O3 - Page 19

EN
18
Instructions: Place the Shoulder Sling over the left
shoulder. Insert the device into the holster. Position
the device at front. Apply the Cuff to the arm. Buckle
up Anchor Strap with Shoulder Sling. Snap the
connector of Anchor Strap into D-ring of cuff. Adjust
length for fi t and comfort.
Instructions: Place the Shoulder Strap over both
shoulders as demonstrated in the diagram. Connect
the device to a belt. Position the device at front.
Apply the Cuff to the arm. Buckle up Anchor Strap
with Shoulder Strap. Snap the connector of Anchor
Strap into D-ring of cuff. Adjust length for fi t and
comfort.
3) Proper Positioning the cuff using Anchor Strap
Option 1: Use the Shoulder Sling /and Anchor
Strap 0to position the cuff as demonstrated in the
diagram below.
Option 2: Use the Shoulder Strap 1and Anchor
Strap 0to position the cuff as demonstrated.