Microlife WatchBP O3 - Viewing Measurement Data; Viewing Data in Ambulatory Mode

EN
26
AMBULATORY HOME CASUAL
Viewing, deleting and transferring measurements
In «AMBULATORY» mode
1) When the M Button is pressed, it briefly displays
the total number of measurements stored, e.g.
N=20.
Viewing measurements
1) Use the Mode switch to first select the type of
measurements wished to be viewed.
*
«- -» will display when the
number of measurements is
less than 12.
*
«A» is displayed when
the number shown is the
average of all data.
2) Then press the M Button.