27
2) Pressing the M Button again displays the average
of all awake hours.
In «Home» mode
1) When the M Button is pressed, it briefly displays
the total number of measurements stored, e.g.
N=20.
*
All individual readings can be viewed by repeatedly pressing
the M Button.
3) Pressing M Button once again shows the average
of all night hours.
*
«- -» will display when the
number of measurements
is less than 12.
*
«A» is displayed when
the number shown is
the average of all data.
*
The display of BP reading and memory of Ambulatory Mode
can be disabled via software setting.
To Next Page
Loading...
