EN
20
6) Measurement reminder – Five seconds before
the next measurement, the device will emit a
short series of beeps to notify the patient of the
coming measurement.
7) During measurements – the patient should be
reminded to remain still, refrain from talking,
and to breath normally during the measurement.
If driving or operating equipment when a
measurement begins, the patient should, when
safe, relax the measurement arm.
*
The device will not beep prior
to asleep measurement in
«AMBULATORY » mode.
*
The patient can stop any single measurement at anytime by
pressing the ON/OFF Button.
Taking blood pressure measurements (cont.)
5 sec
Reminder
*
The beeper of Ambulatory Mode can be disabled via software
setting.
To Next Page
Loading...
