Why Microlife Blood Pressure Monitor cuff does not inflate properly?
If the cuff on your Microlife Blood Pressure Monitor isn't inflating correctly, it could be due to a loose tube connection. Ensure the cuff's tube is securely connected to the device. Alternatively, there might be a leak in the tube or bladder. Inspect for any cracks. If you find cracks, please contact Microlife customer service.
What to do if cannot access Microlife WatchBP office Blood Pressure Monitor device via computer?
If you cannot access the device via computer, ensure that the Bluetooth software provided with the device is installed on your computer.
Why can't I set hide, pressure, or pause interval on my Microlife Blood Pressure Monitor?
If you're unable to set the hide, pressure, or pause interval on your Microlife Blood Pressure Monitor, it's likely because the wireless option (Bluetooth) is turned ON. When Bluetooth is ON, the device cannot be operated using the Start/Stop and M buttons. Please switch off the Bluetooth or use the included software to control the device.
What to do if Microlife Blood Pressure Monitor shows no power or LCD display?
If your Microlife Blood Pressure Monitor has no power and the LCD display is blank, it could be due to a couple of reasons. First, check that the power supply is properly plugged into the wall socket. Second, the battery might be fully discharged. Try recharging it by plugging in the power supply.
What to do if my Microlife WatchBP office Blood Pressure Monitor shows an error signal?
If your Microlife Blood Pressure Monitor displays an error signal, it means the cuff detected error signals during measurement, possibly due to movement or muscle tension. To resolve this, repeat the measurement while keeping your arm still.
What does «Err 1» mean on Microlife WatchBP office?
The «Err 1» message on your Microlife Blood Pressure Monitor means the pulse signals on the cuff are too weak. Try re-positioning the cuff and then repeat the measurement.
What does «Err 2» mean on Microlife Blood Pressure Monitor?
The «Err 2» message on your Microlife Blood Pressure Monitor indicates that error signals were detected during the measurement. This can be caused by movement or muscle tension. To resolve this, repeat the measurement, ensuring your arm remains still.
How to fix no result displayed between measurements on Microlife WatchBP office Blood Pressure Monitor?
If your Microlife Blood Pressure Monitor isn't displaying results between measurements, disable the “hide” function. Alternatively, use the «1st VISIT» / «FOLLOW-UP» mode to measure your blood pressure.
Why Microlife WatchBP office Blood Pressure Monitor has no power or LCD display?
If your Microlife Blood Pressure Monitor isn't turning on or the LCD display is blank, it could be due to a couple of reasons. First, ensure the power supply is properly plugged into the wall socket. Second, the battery might be fully discharged; try recharging it by plugging in the power supply.
How to fix Microlife WatchBP office when there is no power or LCD display?
If there is no power and the LCD display is off, first, ensure the power supply is properly plugged into the wall socket. If that doesn't work, the rechargeable battery might be fully discharged. Recharge it by plugging in the power supply.
General| Device Type | Upper Arm Blood Pressure Monitor |
|---|---|
| Measurement Method | Oscillometric |
| Display Type | LCD |
| Average Reading | Yes |
| Irregular Heartbeat Detection | Yes |
| PC Connectivity | USB |
| Clinically Validated | Yes |
| Accuracy (Pressure) | ±3 mmHg |
| Accuracy (Pulse) | ±5% of reading |
| Measurement Range (Pulse) | 40 - 200 bpm |
| Cuff Size | 22 - 42 cm |
| Power Source | 4 x AA batteries |
| Dimensions | 150 x 100 x 50 mm |
Step-by-step guide for performing measurements in AUSCULTATION mode.
Step-by-step guide for performing measurements in the 1st VISIT mode.
Step-by-step guide for performing measurements in the FOLLOW-UP mode.
Guides users through installing the Bluetooth receiver driver on a computer.
Addresses issues related to the device not powering on or displaying anything.
Provides solutions for when the blood pressure cuff fails to inflate correctly.
Offers guidance when the device is unable to perform a blood pressure measurement.
Solves problems related to connecting or accessing the device from a computer.
Explains error code Err 1 and its cause related to weak pulse signals.
Explains error code Err 2 and its cause related to detected error signals during measurement.
Explains error code Err 3 regarding insufficient cuff pressure.
Explains error code HI for high pulse or cuff pressure.
Explains error code Err 5 for inaccurate or unreadable measurement results.
Explains error code LO for low pulse rate.
Provides essential safety guidelines for using the device correctly and preventing damage.
To Next Page