EasyManua.ls Logo

Micromax A104 User Manual

Micromax A104
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
A104 Assembly Procedure
1. Technical Specifications
Particular
Remarks
Key Matrix For Flashing
NA
Chipset
MT6571A/E
Android Version
Android 4.4.2
Frequency
1.3Ghz
Network Mode
GSM900/1800
ROM
4G
RAM
512M
Internal SD Card memory
TBD
Expandable Memory
TBD
Factory mode code
*#*#3646633#*#*
Question and Answer IconNeed help?

Do you have a question about the Micromax A104 and is the answer not in the manual?

Micromax A104 Specifications

General IconGeneral
RAM1 GB
Internal Storage8 GB
Rear Camera5 MP
Front Camera2 MP
Battery2000 mAh
Operating SystemAndroid 4.4.2 (KitKat)
Display Resolution480 x 854 pixels
CPUQuad-Core 1.3 GHz
Expandable Storageup to 32 GB
Secondary Camera2 MP
SIMDual SIM
Processor1.3 GHz Quad Core

Summary

Technical Specifications

Cautions

Safety Precautions During Servicing

Essential safety guidelines for personnel performing flashing and servicing procedures.

Assembly Procedure

Soldering the Sidekey

Procedure for soldering the sidekey component onto the PCB.

Assemble Coaxial Cable, Camera, and Mylar

Instructions for connecting the coaxial cable, camera, and mylar.

Fit Main FPC and Affix Mylar

Attaching the main FPC and mylar to the small board.

Assemble LCD Module

Mounting the LCD screen onto the phone's shell module.

Assemble GPS, WIFI Antenna, and Speaker

Connecting the GPS antenna, WIFI antenna, and speaker components.

Assemble Small Board, Main FPC, and Solder Motor

Connecting the small board and main FPC, and soldering the motor.

Assemble Main Board and FPCs, Fix Sidekey

Connecting main board, LCD/TP FPC, main FPC, and securing the sidekey.

Assemble Camera, Mylar, and Coaxial Cable

Installing camera, mylar, securing mainboard, and routing coaxial cable.

Assemble Black Mylar and Speaker

Applying black mylar and installing the speaker unit.

Assemble Speaker FPC to B Cover

Connecting the speaker FPC to the B cover.

Assemble Sidekey and Radiating Film to B Cover

Attaching sidekey and radiating film to the B cover.

Assemble GSM Antenna Stand to B Cover

Mounting the GSM antenna stand onto the B cover.

Close Cover and Secure with Screws

Final step: closing the device cover and fastening with screws.

Related product manuals