44
32 Bit I/O: [Enabled]
This settings enables or disables 32 bit IDE data transfers.
Transfer Mode: Fast PIO4
Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode.
Ultra DMA Mode: [Disabled]
Enables ultra fast bus-speed data transfers to and from the HDD
(If your hard disk drive supports this feature)
SMART Monitoring: [Disabled]
Reports status of HDD Smart feature.
Secondary Master: [None]
This adapter is used for a modular external hard drive. Its
settings are the same as IDE Adapter 0 Master (see previous).
Memory Cache: [Enabled] default
Lets your system use the 512K of synchronous pipelined burst
cache. The extremely quick access time (10 nanoseconds) of this
memory greatly boosts system performance.
Boot Options:
Summary Screen
Shows system parameters on boot.
Quick Boot Mode:
Allows the system to skip certain tests while booting. This will
decrease the time needed to boot the system.
System Memory: 640 KB
Reports quantity of conventional system memory.
Extended Memory: XX MB
Reports quantity of system extended memory. This will equal
your total system memory minus one megabyte.
To Next Page