Wireless LAN Access Point Configuration
Parameter Description
MAC Address
MAC address of this active wireless station.
Tx Packet
The number of transmitted packets that are sent out from this active wireless
station.
Rx Packet
The number of received packets that are received by this active wireless station.
TX Rate
The transmission rate in Mbps.
Power Saving
Shows if the wireless client is in Power Saving mode.
Expired Time
The time in second before dissociation. If the wireless keeps idle long than the
expired time, this access point will dissociate it. The wireless client station has to
associate again when it become active.
Refresh
Refresh the “Active Wireless Client Table”.
24
To Next Page
Loading...