Wireless LAN Access Point Configuration
Subnet Mask
Specify a Subnet Mask for your LAN segment. The Subnet Mask of the Access
Point is fixed and the value is 255.255.255.0.
Gateway Address
The IP address of the default gateway of the subnet that this access point resides in. It
allows this access point be accessed by PC from deferent subnet to do configuration.
DHCP Server
Enable or disable the DHCP Server.
Click Apply button at the bottom of the screen to save the above configurations. You can now configure other advance
sections or start using the Access Point.
DHCP Server Setting
DHCP Server will automatically give your LAN client an IP address. If the DHCP is
not enabled then you’ll have to manually set your LAN client’s IP address.
Parameter Description
38
To Next Page
Loading...