Micronta 22-204C - Special Panel Markings Explanation; Common Input Terminal Warning; High Voltage Measurement Caution; Reference to Operating Instructions

TEST LEADS
Use only the same type of test leads as are
supplied with your unit.
Re-
placements are
available from your local Radio
Shack store.
EXPLANATION
OF SPECIAL PANEL
MARKINGS
Special
markings
have been added to
the
panel to
remind you of safety.
To
avoid
electrical shock
and/or
instrument
damage,
do not
connect
the
common input ter-
minal (—
jack) to any
source of
more than
500
volts
with
respect
to
earth/ground.
Be
extra careful
when making
measurements
for high
voltage; do
not touch
terminals or probe
ends.
*2.
A3.
Refer to
the
following complete
operating
instructions.
DC VOLTAGE MEASUREMENTS
f
ARN
ING
i
:
USE
EXTREME CARE WHEN
MAKING MEASURE-
iNTS
FOR HIGH VOLTAGE;
DO NOT TOUCH TERMINAL OR
1.
Plug the
test
leads into the
correct jacks (black into
0
COM
and red
into
0
V-ft-A).
2. Set
the range switch to
one of the DC V
positions;
it is best to start at
the top
and work down.
-
5
-