Chapter 4. Installation
13/24
① Attach the irrigation tube to the straight or
contra-angle handpiece.
Tube clip
Coolant container
Insert needle
① Stick the insert needle into the coolant container.
② Hook-in the coolant container on the bottle holder.
③ Close the tube clip.
④ Open the tube clamp before start-up.
4.4 Connection of power cord and foot switch
4.5 Disconnection
① Connect power cable to power cable termianl.
② Connect Foot switch connector to Foot switch terminal
Be careful to fit into the groove
upon connection.
① ②
Disconnection of the product takes place in reverse order of connection.
To Next Page
Loading...
