Microplex SOLID F40 - Page 5

Table of Contents 5
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F40 Edition 1.1
Chapter Page
6. Printer Cleaning 83
6.1. Cleaning the Elements behind the Front Cover 84
6.2. Cleaning the Transport Unit 87
6.3. Cleaning the Paper Feed Unit 90
6.4. Cleaning the Paper Near End Sensor 91
6.5. Cleaning the Power Stacker 92
7. Operator Maintenance 93
7.1. Charger Cleaning 93
7.1.1. Main Charger Cleaning 94
7.1.2. Pre-Charger Cleaning 97
7.1.3. Transfer-/Separator Charger Cleaning 99
7.2. Developer Unit Cleaning 101
7.3. Developer Unit Refurbish, Developer Powder Exchange 106
7.4. Main Charger Replacing 113
7.5. Pre-Charger Replacing 114
7.6. Transfer-/Separator Charger Replacing 115
7.7. Photoreceptor Drum Exchange 117
8. Troubleshooting 127
8.1. Reduced Print Quality 128
8.2. Error Messages 129
8.2.1. Error Codes 131
8.3. Paper Jam 133
8.3.1. Paper Jam inside the Tractor 133
8.3.2. Paper Jam inside the Print System 134
8.3.3. Paper Jam within the Power Stacker 139
8.4. Print Repetition after an Error 140