What to do if there are spots of toner on Microplex SOLID F40 Printer printout?
Toner spots on your Microplex Printer printouts may be due to a dirty pre-charger or developer unit. Clean the pre-charger or the developer unit. If the issue persists, consider replacing the toner cartridge.
How to fix partially uneven printout on Microplex SOLID F40?
To resolve uneven printouts from your Microplex Printer, clean the wires of the transfer-/separator charger.
What to do if Microplex Printer printout has empty spots?
If your Microplex Printer's printouts have empty spots, use only dry fanfold paper.
Provides an overview of the SOLID F40's printing technology, speed, and capabilities.
Details crucial safety precautions for operating and handling the printer.
Explains the steps and requirements for setting up the printer physically.
Identifies and illustrates the main external and internal parts of the printer.
Guides users on the correct procedure for inserting fanfold paper into the printer.
Step-by-step instructions for safely removing and installing a new toner cartridge.
Illustrates the layout and key elements of the printer's control panel interface.
Describes how to adjust printer settings using the control panel.
Explains how to select and set the desired print resolution for output.
Details how to clear pending print jobs from the printer's memory.
Guides users on setting up network connectivity for the printer.
Instructions for cleaning specific internal components accessible after opening the front cover.
Explains how to clean the developer unit to maintain print quality.
Step-by-step guide for replacing the photoreceptor drum unit.
Lists common error messages displayed by the printer and their meanings.
Provides instructions on how to identify and resolve paper jams within the printer.
General| Print Technology | Thermal Transfer |
|---|---|
| Max Print Width | 104 mm |
| Operating Temperature | 5°C - 40°C |
| Print Resolution | 300 dpi |
| Interfaces | USB, Ethernet, Serial |
| Supported Media Types | Tags |
| Media Width | 25.4 mm - 114 mm |
| Media Thickness | 0.06 - 0.25 mm |
To Next Page
