What to do if there are spots of toner on the Microplex SOLID F90 HD printout?
If you notice spots of toner on your printouts, there are several possible causes. It could be due to a dirty pre-charger, in which case you should clean the pre-charger. Another potential cause is a dirty developer unit, so cleaning the developer unit may resolve the issue. If neither of those steps works, try replacing the toner cartridge.
Why does the Microplex Printer printout show partially grey stripes?
If your printouts are showing partially grey stripes, the issue might be with the main charger. A suggested solution is to clean the wires of the main charger.
Why does the Microplex SOLID F90 HD Printer printout show a grey background?
If your Microplex printer is producing printouts with a grey background, the pre-charger might be the cause. To resolve this, clean the wires of the pre-charger.
How to fix uneven printout on Microplex Printer?
To fix a partially uneven printout on your Microplex printer, clean the wires of the transfer-/separator charger.
What to do if Microplex SOLID F90 HD printout has "empty" spots?
If your Microplex printer's printouts have empty spots, make sure you are using only dry fanfold paper. Using dry paper can resolve this issue.
Overview of the SOLID F90 HD print system, its technology, speed, and media compatibility.
Explanation of symbols and text formatting used in the manual for easier understanding.
Declaration of Conformity for the MICROPLEX SOLID F90 HD printer regarding relevant EU directives.
Essential safety guidelines for operating the MICROPLEX SOLID F90 HD printer to ensure secure operation.
List of items to check upon receiving the MICROPLEX SOLID F90 HD printer and its accessories.
Guidelines for proper printer placement, ventilation, and environmental conditions for optimal operation.
Identification of external printer components and an interior view of the SOLID F90 HD.
Instructions for loading continuous fanfold paper into the MICROPLEX SOLID F90 HD printer.
Step-by-step guide on how to replace the toner cartridge in the SOLID F90 HD printer.
Procedure for replacing the waste toner bottle when it is full.
Steps for connecting the MICROPLEX SOLID F90 HD printer to a computer or network.
Procedure for turning on the SOLID F90 HD printer and checking its operational status.
Diagram showing the layout and components of the printer's control panel.
Explanation of the display and LED indicators on the printer's control panel.
How to change printer settings and customize features using the control panel.
Overview of the printer's menu hierarchy and navigation for accessing functions.
Explanation of the diagrams used to describe control panel functions and key sequences.
How to print a status sheet containing current printer configuration and available fonts.
How to generate a list of all installed fonts, including demo prints and PCL commands.
Procedure for selecting the print resolution (e.g., 300 dpi or 600 dpi) for the printer.
How to activate Hexdump Mode for printing interface data in hexadecimal format for error diagnosis.
How to resume normal printing after Hexdump Mode or produce a FORM FEED.
Function to clear data from the input buffer, allowing resumption of a print job after interruption.
How to print a survey of available panel functions, showing the menu structure.
How to generate test prints for error analysis without sending data to the printer.
Procedure for adjusting the printer to a new page length after inserting new paper material.
How to set the arrangement of print pages per format, enabling two-up printing.
Function to adjust the format width (print width) to match the used paper format.
How to select the active print orientation (portrait or landscape) for the entire printout.
How to set the interface parameters and SIA timeout for data transfer.
How to change the active printer emulation mode (e.g., HP PCL 5).
How to set the language for display messages, status sheets, and font lists.
Configures the transparent code for initiating IDOL commands with printable characters.
How to choose the distribution of RAM between input buffer and macro/download memory.
Procedure to revert all printer configurations back to their factory default settings.
How to select the active font by choosing a font number from the available list.
How to select the active text orientation (portrait, landscape, upside down).
How to select the active symbol code for character representation.
How to set the text margins, expressed in dots, for the printout.
How to shift the print image horizontally (crosswise to print direction) on the paper.
How to shift the print image vertically (in the print direction) on the paper.
How to set the number of lines per inch for line printer emulation.
How to set the number of characters per inch for line printer emulation.
How to adjust the density of printed characters for darker or lighter output.
How to set network parameters like IP address, subnet mask, and gateway for network connection.
Instructions for cleaning internal components accessible after opening the front cover.
Procedure for cleaning the paper transport unit to ensure smooth paper feeding.
Steps for cleaning the paper feed unit, including the tractor and surrounding area.
How to clean the Paper Near End Sensor (PNES) after a specified number of pages printed.
Instructions for cleaning the power stacker unit using a vacuum cleaner.
General guidelines for cleaning the charger units, performed after specific page counts.
Detailed procedure for cleaning the main charger wire and grid.
Step-by-step instructions for cleaning the pre-charger unit.
Procedure for cleaning the transfer-/separator charger wire.
Instructions for cleaning the developer unit, emphasizing care to avoid sensor damage.
Procedure for exchanging developer powder after a high page count.
Step-by-step guide for replacing the main charger unit.
Procedure for replacing the pre-charger unit after a specified number of pages.
Procedure for replacing the transfer-/separator charger unit.
Detailed instructions for exchanging the photoreceptor drum after a maximum page count.
Common issues causing reduced print quality and their corresponding solutions and corrections.
List of common error messages displayed on the control panel and their remedies.
Additional printer error codes displayed in hex format and their descriptions.
General section on paper jam issues and procedures for clearing them.
Specific instructions for clearing paper jams occurring within the printer's tractor mechanism.
Procedure for clearing paper jams within the fuser and transport units.
How to resolve paper jams occurring in the power stacker unit.
Explanation of the automatic jam safety function and print job resumption after an error.
Detailed steps for safely repacking printer components for transport or return.
Technical details including print technology, speed, resolution, paper size, interfaces, and environment.
Explanation of consumables and application-specific wearing materials affecting cost per page.
Information on spare parts, wear parts, and print quality metrics like MNPSQ and IQ.
To Next Page
General
