Microplex SOLID F90 HD - _______________________________________________________________________________________________

12 Introduction
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F90 HD Edition 1.0
- Do not bridge a safety device.
- Do not push anything into the ventilation apertures.
- Never perform installations, cleanings or maintenance work
that is not described in this manual. Such work should only be
done by MICROPLEX authorized service personnel.
- To avoid damage, the devices must be switched off (i.e. cut
off from the power supply) before the user begins connecting
the interface line.
In case of emergency, in order to disconnect the printer from the
main power, please note the following:
- For connected printers with plugs, an easily accessible power-
outlet should be installed near the printer.
- For perma
nently connected printers, an easily accessible
emergency power-off switch should be installed close to the
printer.
- Please do not conceal any disconnect devices with the printer
or other objects.
- Please follow all the information and hints directly attached to
the device and/or described in this manual.
- To ensure optimum printer performance, only use
MICROPLEX consumables.