Microplex SOLID F90 HD - Developer Unit Cleaning

Operator Maintenance 105
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F90 HD Edition 1.0
7.2. Developer Unit Cleaning
!
Please check the extend of soiling of the developer unit every time the
toner cartridge is replaced (see section 3.2).
Cleaning the developer unit has to be done in due time to avoid
reduced print quality (see section 8.1, too).
Please clean the developer unit especially careful to avoid damaging
the sensors.
Toner cartridge
Guide rail
Cleaning brush
Screws of the cover
Developing roller
Sealing welt
Toner cartridge
Sensor (toner empty)
Deve loping roller
Sensor (toner density)
Toner spindle
Toner roller
Developer tub