Microplex SOLID F90 HD - Choosing Print Resolution

46 Panel Functions
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F90 HD Edition 1.0
5.3. Choosing Print Resolution
This function allows the user to choose the current print
resolution.
If, after a particular resolution is chosen, the print data stream
indicates a different resolution (e.g. via a WINDOWS print
driver), the second print resolution will be used only for that job.
ON LINE
SAVE
SAVE
SAVE
MENU
SAVE
ON LINE
Panel displ
ay
[SOLID F90 HD ]
[Menu Level 1
]
( ( (
[Engine ]
[Resolution ]
[300 dpi ]
( ( (
[600 dpi ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press one of the ARROW keys until
[Engine ] is displ
ayed.
Menu item Engine is selected.
Menu item Resolution is selected.
Press one of the ARROW keys until
the desired Resolution (e.g. 600
d
ots per inch) is displayed.
600 dpi resolution is selected.
In addition this new value can be
saved as setup value (
using the
SAVE key), before the printer is
turned ON LINE again.