Microplex SOLID F90 HD - Normal Print Mode Activation (incl. FORM FEED)

Panel Functions 49
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F90 HD Edition 1.0
5.5. Normal Print Mode Activation (incl. FORM FEED)
The normal print mode suspends the Hexdump Mode.
This function is activated, when a print job must be continued
without turning the printer off and on again. In addition to that the
function “Normal Print Mode Activation“ is used to produce a
FORM FEED.
ON LINE
SAVE
SAVE
ON LINE
Panel display
[SOLID F90
HD ]
[Menu Level 1 ]
[Status Sheet ]
( ( (
[Normal Print/FF ]
[Normal Print/FF ]
Notes
Turn the printer OFF LINE with this
key.
Menu level 1 is selected.
Press one of the ARROW keys until
[Normal Print/FF ] is displayed.
The normal print mode is activated.
The printer is turned ON LINE
again.
Note:
After activating the normal print mode a FOR
M FEED
is released
automatically and one sheet is put out.
This is necessary because after a test in the Hexdump Mode it is
possible that data can remain in the input buffer unintentionally
(cause: in the Hexdump Mode no control characters are evaluated
and no FORM FEED
is effected).