Microplex SOLID F90 HD - Generating Test Prints (Sliding Pattern)

52 Panel Functions
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F90 HD Edition 1.0
5.8. Generating Test Prints (Sliding Pattern)
This function generates a series of test prints without sending
data to the printer.
These test prints facilitate error analysis.
ON LINE
TEST
ON LINE
Panel display
[SOLID F90
HD ]
[Menu Level 1 ]
[Menu Level 1
]
Notes
Turn the printer OFF LINE with this
key.
A status sheet is generated
(possibly pr
inted on several pages)
The printer is turned ON LINE
again.
Another way to activate the function:
see the following page !