Troubleshooting 131
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F90 HD Edition 1.0
8. Troubleshooting
!
!
When an error occurs,
a corresponding error message is displayed
in the control panel (see section 8.2).
Please address the problems described in section 8.1 and 8.2
yourself, especially the consumable replacement.
Only a MICROPLEX authorized operator or service engi
neer should
address printer problems for which no detailed remedies are given
in the following pages.
When reporting a problem to your service engineer, please give him
the exact error message. That helps to localize the error more
quickly.
If an error message indicates a paper jam, a print repetition will be
necessary.
The printer is provided with an automatic jam safety routine to
prevent a loss of information.
This automatically jam safety routine can also be switched off, if the
user wants to take up the print job at a passage chosen by himself
(see section 5.6 Clearing the Input Buffer).
To Next Page
Loading...
