146 Troubleshooting
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F90 HD Edition 1.0
8.4. Print Repetition after an Error
The printer is provided with an automatic jam safety function to
prevent a loss of data.
When an error occurs, all the pages on the paper path will be
printed again. This ensures that no data will get lost.
The exact number of pages to repeat depends on the format length
and the position where the error occurred on the page.
This automatic jam safety function can be switched off (by changing
the EEPROM - configuration) if the user wants to resume the print
job at a position he chooses himself.
In addition to this see panel function Clearing the Input Buffer
(section 5.6).
To Next Page
Loading...
