Microplex SOLID F90 HD - Text Orientation Selection

70 Panel Functions
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F90 HD Edition 1.0
5.20. Text Orientation Selection
This function selects the active text orientation.
ON LINE
SAVE
SAVE
SAVE
MENU
SAVE
ON LINE
Panel display
[SOLID F90
HD ]
[Menu Level 1 ]
( ( (
[Page Menu ]
[Font Number ]
( ( (
[Orientation ]
[Orientation 0 ]
( ( (
[Orientation 1 ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press one of the ARROW keys until
[Page Menu ] is displayed.
Press one of the ARROW keys until
[Orientatio
n ] is displayed.
Press one of the ARROW keys until
the desired orientation is displ
ayed.
The orientation 1 = landscape is
selected.
In addition this new value can be
saved as setup value (
using the
SAVE key), before the printer is
turned ON LINE again.
Text orientation assignment: Orientation 0 = Portrait (upright format)
Orientation 1 = Landscape (horizo
ntal format)
Orientation 2 = Portrait upside down
Orientation 3 = Landscape upside down