Microplex SOLID F90 HD - Emulation Selection

Panel Functions 61
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F90 HD Edition 1.0
5.14. Emulation Selection
With this function you can change the active emulation.
ON LINE
SAVE
SAVE
SAVE
MENU
SAVE
ON LINE
Panel display
[SOLID F90
HD ]
[Menu Level 1 ]
( ( (
[Configuration ]
[Interface]
( ( (
[Emulation ]
[SOLID Standard ]
( ( (
[HP PCL 5 ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press one of the ARROW keys until
[Configurat
ion ] is displayed.
Press one of the ARROW keys until
[Emulation ] is displayed.
Press one of the ARROW keys
until the desired emulation
(e.g. HP PCL 5) is displ
ayed.
The emulation HP PCL 5 is selected.
In addition this new value can be
saved as setup value (
using the
SAVE key), before the printer is
turned ON LINE again.