Microplex SOLID F90 HD - Selection of Memory Distribution (Input Buffer)

Panel Functions 65
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F90 HD Edition 1.0
5.17. Selection of Memory Distribution (Input Buffer)
This function enables the user to choose the distribution of the
available RAM memory between input buffer and macro/download
memory.
ON LINE
SAVE
SAVE
SAVE
MENU
SAVE
ON LINE
Panel display
[SOLID F90
HD ]
[Menu Level 1 ]
( ( (
[Configuration ]
[Interface ]
( ( (
[Input Buffer ]
[32 kB ]
( ( (
[100 kB ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this key.
Press one of the ARROW keys until
[Configurat
ion ] is displayed.
Press one of the ARROW keys until
[Input Buffer ] is displayed.
Press one of the ARROW keys until the
desired memory distribution is
displ
ayed. The input buffer size is
specified in kilobyte (kB) or in percent
of the installed memory.
100 kB is selected as input buffer.
In addition this new value can be
saved as setup value (using the SAVE
key), before the printer is turned ON
LINE again.