Microplex SOLID F90 HD - General Safety Instructions

Introduction 11
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F90 HD Edition 1.0
1.4. General Safety Instructions
This device produces, employs and possibly radiates high
frequency energy. Because of this, incorrect installation can
disturb radio communications.
This MICROPLEX product and its consumables are designed
and tested according to strict safety standards.
Heeding the following instructions ensures secure operation:
- Make sure that your electricity source is grounded adequately.
- Install the device on solid and level ground.
- Only trained staff is authorized to transport the equipment.
- Only use consumables which are specially developed for this
device.
- Unsuitable consumables may reduce printer output quality or
cause damages.
- No liquids should get on or into the device.
- Do not remove any cover or safety device f
astened by screws.