Microplex SOLID F40 - Clearing the Input Buffer (Cancel Job)

50 Panel Functions
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F40 Edition 1.1
5.6. Clearing the Input Buffer (Cancel Job)
This function permits the resumption of a print job at a
particular page after a print interruption (e.g. paper jam). The
data contained in the input buffer before the interruption are
cleared.
ON LINE
SAVE
SAVE
ON LINE
Panel display
[SOLID F40 ]
[Menu Level 1 ]
[Status Sheet ]
) ) )
[Cancel Job ]
[Cancel Job ]
Notes
Turn the printer OFF LINE with this
key.
Menu level 1 is selected.
Press one of the ARROW keys until
[Cancel Job ] is displayed.
All data contained in the input buffer
will be cleared.
The printer is turned ON LINE
again.