Microplex SOLID F40

To Next Page

To Previous Page

Panel Functions 49

_______________________________________________________________________________________________

MICROPLEX Operator’s Manual SOLID F40 Edition 1.1

5.5. Normal Print Mode Activation (incl. FORM FEED)

The normal print mode suspends the Hexdump Mode.

This function is activated, when a print job must be continued

without turning the printer off and on again. In addition to that the

function “Normal Print Mode Activation“ is used to produce a

FORM FEED.

ON LINE

SAVE

ON LINE

Panel display

[SOLID F40 ]

[Menu Level 1 ]

[Status Sheet ]

) ) )

[Normal Print/FF ]

Notes

Turn the printer OFF LINE with this

key.

Menu level 1 is selected.

Press one of the ARROW keys until

[Normal Print/FF ] is displayed.

The normal print mode is activated.

The printer is turned ON LINE

again.

Note:

After activating the normal print mode a FORM FEED

is released

automatically and one sheet is put out.

This is necessary because after a test in the Hexdump Mode it is

possible that data can remain in the input buffer unintentionally.

(Cause: in the Hexdump Mode no control characters are evaluated

and no FORM FEED

is effected).

Microplex SOLID F40 - Page 49