Microplex SOLID F40 - Page 48

48 Panel Functions
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F40 Edition 1.1
5.4. Hexdump Mode Activation
Within the Hexdump Mode the printer prints all characters received
via interface without any interpretation (hexadecimal coded).
This mode helps with error diagnosis. The Hexdump Mode can be
activated only temporarily.
ON LINE
SAVE
SAVE
ON LINE
Panel display
[SOLID F40 ]
[Menu Level 1 ]
[Status Sheet ]
) ) )
[Hexdump ]
[Hexdump ]
Notes
Turn the printer OFF LINE with this
key.
Menu level 1 is selected.
Press one of the ARROW keys until
[Hexdump ] is displayed.
The Hexdump Mode is activated.
The printer is turned ON LINE
again.
Note:
By activating the normal print mode (see next section) or by
turning the printer off and on again the printer can be taken out of
Hexdump Mode.
Time between turning the printer off and on again should be at least
15 seconds.