Microplex SOLID F40 - Page 70

70 Panel Functions
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F40 Edition 1.1
5.20. Text Orientation Selection
This function selects the active text orientation.
ON LINE
SAVE
SAVE
SAVE
MENU
SAVE
ON LINE
Panel display
[SOLID F40 ]
[Menu Level 1 ]
) ) )
[Page Menu ]
[Font Number ]
) ) )
[Orientation ]
[Orientation 0 ]
) ) )
[Orientation 1 ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press one of the ARROW keys until
[Page Menu ] is displayed.
Press one of the ARROW keys until
[Orientation ] is displayed.
Press one of the ARROW keys until
the desired orientation is displayed.
The orientation 1 = landscape is
selected.
In addition this new value can be
saved as setup value (using the
SAVE key), before the printer is
turned ON LINE again.
Text orientation assignment: Orientation 0 = Portrait (upright format)
Orientation 1 = Landscape (horizontal format)
Orientation 2 = Portrait upside down
Orientation 3 = Landscape upside down