How to troubleshoot problems running the Broadband Network Utility Setup Wizard for Microsoft Network Router?
Verify that your computer meets the minimum system requirements for a Microsoft Wireless Base Station. Turn off any virus detection software. Make sure that you install the software before installing the hardware.
General| Frequency Band | 2.4 GHz |
|---|---|
| Max Wireless Speed | 11 Mbps |
| Security | WEP, WPA, WPA2 |
| Wireless Standard | 802.11b |
| Ports | 1 x 10/100 Mbps Ethernet WAN, 4 x 10/100 Mbps Ethernet LAN |
| Antenna Type | External |
| Standards | IEEE 802.3, IEEE 802.3u |
| Data Rate | 11 Mbps |
Explains the function of lights and ports on the base station.
Guide to reset the base station to its default configuration.
Advice on optimal placement for wireless performance.
Tips for maximizing wireless range and signal strength.
Compares Ethernet and phone cables, and their connectors.
How to gather necessary network configuration details before setup.
Step-by-step instructions for a standard base station installation.
Alternative procedures for different network configurations.
Overview of common tasks after network setup.
How to share the Internet connection across the network.
Procedures for sharing files and folders on the network.
Introduction to the utility for checking network status and settings.
How to adjust adapter, wireless, and encryption settings.
General advice on protecting the network from threats.
Overview of base station configuration options.
Instructions on how to access the configuration interface.
Steps to set up TCP/IP properties on client computers.
General guidance for common setup problems.
Solutions for installation and setup issues with the software.
Steps to resolve issues related to base station detection.
Information on how to get help with the product.
Compliance details for radio and TV interference.
Details of the manufacturer's guarantee and liability.
Detailed technical data for the base station.
Minimum hardware and software needs for setup.
To Next Page