Microsoft Xbox 360 - Dismantling Instructions Manual

- 1 -
These instructions will show you how to open the console to replace the DVDrom drive, laser
and other internal parts. Opening your console will void your warrantee, and ConsoleParts4U
does not accept any responsibility for broken tablets due to the installation process. You
proceed at your own risk.
• Remove Hard Drive
• Grasp the hard drive assembly and press the release button while lifting its front edge.
• Remove the hard drive assembly from the top vent.
Bottom Vent
• Stand the console vertically
with the bottom edge facing
up.
•
Throughout the following
opening procedure, the finger
of an
Xbox 360 opening
tool can be used in place of a
spudger.
• Insert the flat end of a spudger
or the edge of an Xbox 360
opening tool into the small
gap at the front edge of the
bottom vent.
• Pry the front edge of the bottom vent away from the faceplate.
Xbox360
Dismantling Instructions