32
EN
HOW IT WORKS
The BTE (Behind the Ear BTE) hearing aids are anatomical
instruments placed behind the ear. . Are powered by
a battery and are typically designed to cover severe or
profound hearing losses. All mechanical and electronic
components are contained in an ergonomic housing. They
adapt to the user’s ear by molds which leaves a conductive
tube that attaches to the side of the hearing aid.
MICROPHONE: receives the sound and converts it into an
electrical signal.
AMPLIFIER: digital processor that receives the signal and adapts
it to the parameters introduced for each loss.
RECEIVER: converts the electrical signal back into sound and
transmits it into the user's ear.
Microson hearing aids are designed for correcting hearing
problems and compensating for hearing loss by selective
sound amplification. Your hearing aids should be fitted by a
hearing care specialist.
For safe use, read the instructions in this manual carefully.
This manual was drawn up in compliance with the EN 1041
and EN 980 standards.
INTENDED USE
DISPOSAL INFORMATION
Mcrophone Amplfer
Processor
Recever
ENEN
This product must not be disposed together with the
domestic waste. All users are obliged to hand in all electrical or
electronic devices, regardless of whether or not they contain
toxic substances, at a municipal or commercial collection
point so that they can be disposed of in an environmentally
acceptable manner. Remove the batteries before disposing
of the equipment. Do not dispose of old batteries with your
household waste, but dispose of them at a battery collection
station at a recycling site or in a shop. Consult your municipal
authority or your dealer for information about disposal.
Within the European Union, the marked equipment
is covered by “Directive 2002/96/EC of the
European Paliament and of the Council of 27
January 2003 on waste electrical andelectronical
equipment.”Amended by “Directive 2003/108/EC”
(WEEE).
Microphone
Amplifier
Receiver
To Next Page
Loading...