2
¾ 8 levels of LCD contrast can be set
¾ Alarm clock function
¾ Tone/Pulse dialing mode can be set
¾ Flash time 100/300/600/1000ms for selection
¾ LCD backlight function
¾ Auto/manual answering function
¾ Dialing barring function
¾ Keypad lock function
¾ Mute function
TAM Specification:
¾ Digital Answering machine with max. 60 minutes messages
¾ ICM recording
¾ Caller ID display when playing message
¾ 2 groups OGM -can be recorded by user
¾ Memo recording with max. 120 seconds
¾ Time & date stamp
¾ Voice prompt in English
LCD DISPLAY/LCD MAP/KEY PAD DESCRIPTION
Icon Function
The antenna icon will always be shown on the LCD, it indicates for
signal strength, flashes when the handset is out of range, disappear
when registration to base is lost.
Displayed when the user has pressed once key in idle state.
The alarm icon will be shown as steady on when the alarm is set.
The alarm icon will flash when the alarm is triggered.
Displayed when external ring set to off
Displayed when viewing the phonebook entries.
Displayed when a new voice message is received from the network.
REP Displayed when the same missed call received more than one time
CID
Displayed when a new call comes
Displayed when press
key twice in idle state.
To Next Page
Loading...