6
2. Plug the main adapter into mains socket with the switch on the socket set to off.
3. Switch on main power at the socket.
4. Fit the batteries in the handset.
Note: If you do not modify the password yourself, all the passwords in this manual are default as 0000.
Menu Settings
During idle state, press the SET/OK key to enter the menu setting.
Press ∧ or ∨ key to select the above items and then press SET/OK key to enter. Press
to quit the
setting state, or press
to back to the previous menu. Details of each item are shown in next parts.
Note: The system will time out if you leave more than 30 seconds between key presses.
The menu tree as follow:
LIST
NEW ENTRY
EDIT RECORD
DEL RECORD
DELETE ALL
PHONE BOOK
MEM STATUS
MISSED
RECEIVED
CALL LOG
DIALED
DELETE HS
TONE
DIAL MODE
PULSE
FLASH TIME 100/300/600/1000MS
MODIFY PIN default 0000
BS SETTINGS
BS DEFAULT default 0000
ON (SNOOZE ON/OFF)
ALARM
OFF
INT RING
RING SETUP
EXT RING
KEY TONE
BATTERY LOW
TONE SETUP
RANGE ALARM
LANGUAGE
HS NAME
ON
AUTO ANSWER
OFF
BARRING default 0000
DATE&TIME
CONTRAST
SELECT BASE BASE 1,2,3,4 and AUTO
HS SETTINGS
HS DEFAULT default 0000
REGISTRATION BASE 1(2,3,4)
To Next Page
Loading...