MODE FUNCTIONS OPERATION and
DECLARATION OF CONFORMITY
During Dual Watch (while not receiving a
transmission), You Can Choose From The Following:
a. Press and hold the TALK button to communicate on either
Dual Watch Location 1 or the Dual Watch Location on
which, during Dual Watch, you last received a
transmission. This will return the radio to LISTENING
MODE.
b. Press the MODE button to proceed to other functions.
c. Press the ENTER button to return to LISTENING MODE on
either Dual Watch Location 1 or the Dual Watch Location
on which, during Dual Watch, you last received a
transmission.
To terminate Dual Watch:
1. Choose one of the following:
a. Press the ENTER button to return to LISTENING MODE on
either Dual Watch Location 1 or the Dual Watch Location
on which, during Dual Watch, you last received a
transmission.
b. Press the TALK button to return to LISTENING MODE on
either Dual Watch Location 1 or the Dual Watch Location
on which, during Dual Watch, you last received a
transmission.
c. Press the MODE button and proceed to the next available
Mode Function.
10 Call Tone Settings
You can choose between ten (10) different call tone settings to
transmit a unique call alert.
To Change a Call Tone Setting:
1. Press the MODE button until the letter
“C” and the current call tone number
(1 to 10) is displayed. The current call
tone will sound for two (2) seconds.
2. Press the CHANNEL UP or CHANNEL
DOWN button to hear the other call
tone settings.
3. When your desired call tone setting is
displayed, choose one of the following:
a. Press the MODE button to enter the
setting and proceed to other
functions.
English
b. Press the ENTER button to enter the setting and return to
LISTENING MODE.
c. Do not press any buttons for fifteen (15) seconds to
enter the setting and return to LISTENING MODE.
"Roger Beep"
Confirmation Tone
Your listener will hear an audible tone
when you release the TALK button. This
alerts the other party that you have
finished talking and that it is OK for them to speak. This feature
can be turned On or Off.
To Turn “Roger Beep” On or Off:
When you turn On your microTALK
®
radio for the first time,
“Roger Beep” will be On.
1. Press and release the MODE button
until the “Roger Beep” icon flashes on
the display. The current On or Off
setting is displayed.
2. Press the CHANNEL UP or CHANNEL
DOWN button to select “Roger Beep”
On or Off.
3. When your desired Roger Beep Mode
setting is displayed, choose one of the
following:
a. Press the MODE button to enter the
setting and proceed to other
functions.
b. Press the ENTER button to enter the
setting and return to LISTENING
MODE.
c. Do not press any buttons for fifteen (15) seconds to
enter the setting and return to LISTENING MODE.
The setting you select will be saved when you turn your radio
Off and On again. When the “Roger Beep” is On, the “Roger
Beep” icon will be displayed.
Keystroke Tones
With Keystroke Tones turned On, your radio
will sound beeps each time you press a
button or change a setting. This feature can
be turned On or Off.
To Turn Keystroke Tones On or Off:
When you turn On your microTALK
®
radio for the first time,
Keystroke Tones will be On.
1. Press the MODE button until the
Keystroke Tones icon flashes on the
display. The current On or Off setting is
displayed.
2. Press the CHANNEL UP or CHANNEL
DOWN button to turn Keystroke Tones
On or Off.
3. When your desired Keystroke Tone
Mode setting is displayed, choose one
of the following:
a. Press the MODE button to enter the
setting and return to LISTENING
MODE.
b. Press the ENTER button to enter the
setting and return to LISTENING
MODE.
c. Do not press any buttons for fifteen (15) seconds to
enter the setting and return to LISTENING MODE.
The setting you select will be saved when you turn your
radio Off and On again. When Keystroke Tones are On, the
keystroke tone icon will be displayed.
DECLARATION OF
CONFORMITY
This declaration is the responsibility of the manufacturer/importer
Cobra Electronics Europe Limited
Dungar House
Northumberland Avenue
Dun Laoghaire
County Dublin, Ireland
Date: October 29, 2003
This certifies that the following designated product
PRIVATE MOBILE RADIO: MT 925 PRO
(Product Identification)
complies with the essential protection requirements of R & TTE Directive
1999/5/EC on the approximation of the laws of the Member States relating to
Radio Spectrum Matters, EMC and Electrical Safety.
This declaration applies to all specimens manufactured in accordance with the
attached technical documentation described in Annex II of the Directive which
forms part of this declaration.
Assessment of compliance of the product (class 2.6) with the requirements
relating to the essential requirements according to Article 3 R & TTE was based
on Annex IV of Directive 1999/5/EC and the following standards:
Radio Spectrum:
EN 300 296-2 v.1.1.1 (02/01)
(Identification of regulations/standards)
EMC:
EN 301 489-5 (07/2000)
(Identification of regulations/standards)
Electrical Safety:
EN 60065: 1998
(Identification of regulations/standards)
RF Exposure:
EN 50371: 2002
(Identification of regulations/standards)
DUBLIN, IRELAND MIKE KAVANAGH
Select On/Off
Channel Buttons
Mode Button
Roger Beep Icon
Channel Buttons
Mode Button
Call Tone Setting
Channel Buttons
Mode Button
Select On/Off
Keystroke Icon
To Previous Page
Loading...