2 ScanMaker 9800XL Installing and Getting Started
This document provides information on how to install the
ScanMaker 9800XL flatbed color scanner and perform basic
image scanning procedures.
Introduction
The ScanMaker 9800XL is a 48-bit color flatbed scanner that supports tabloid-sized
(A3 or B-size) scanning for corporate users or designers. This scanner scans images
up to 12" x 17" at an optical resolution of 1600 x 3200 dpi (12800 x 12800 dpi
interpolated).
The ScanMaker 9800XL
provides three built-in interfaces
(FireWire, USB, and SCSI), and
allows you to choose any of the
three interfaces to digitize image
originals.
System Requirements
• 128MB RAM or more recommended
• CD-ROM drive (for installing software)
• Color display with 24-bit color output capability
FireWire
• PC - Pentium II or later with built-in FireWire port
- Windows 98 SE, 2000, Me, or XP
• Mac - iMac DV or new G3/G4 with built-in FireWire support
- Mac OS 9.x
USB
• PC - Pentium PC or later with USB port
- Windows 98, 2000, Me, or XP
• Mac - iMac or G3/G4 with built-in USB port
- Mac OS 8.6 through 9.x
SCSI
• PC - Pentium PC or later
- Windows 95, 98, 2000, Me, XP, or NT 4.0
• Mac - Power PC class or later with ASPI compliant SCSI port
- Mac OS 8.5 through 9.x
To Next Page
Loading...
Need help?
General