14 Microtek TMA1600 Installing and Getting Started
*Black plate
Light from the TMA1600 and other ambient light during scanning may result in
overexposed images. The black plate is used to shield unwanted light out, ensuring
correct exposure and optimal image quality during scanning.
Caution:
1. The black plate may become dirty over time and with prolonged use. To clean the
plate, use a white cotton cloth dipped in some water, and gently wipe the plate
surface. This ensures that the black plate is in optimal condition at all times.
2. The protective film covers the black plate during shipping and prevents it from
being scratched. When peeling the film from the plate, be careful not to tear or
bend the black plate.
To Next Page
Loading...
